high speed steam generators

Gas and Steam Turbine Bearings for Thrust and Journal Use

Kingsbury has supplied thousands of bearings for high speed/high load gas and steam turbine applications. Reduces operating temperatures by 5° to 20° C, depending on shaft speed Increases load capacity by 15% - 20%, reducing required bearing size Lowers oil flow by 50%, allowing for reduced lube system demand Improves efficiency, with a 45% reduction in friction losses.

Get A Quote

Types of Steam Turbine - an overview | ScienceDirect Topics

Modern industrial steam turbines run at high speed, e.g. 10 00012 000 rpm, and are connected to their generators through reduction gearboxes to give the required generator speed of 1500 or 3000 rpm. Steam turbines are extremely dependable, requiring little maintenance and attention.

Get A Quote

Rexnord Euroflex Disc Couplings

platform, a steam turbine driving a centrifugal gas compressor in a refinery, or a motor driving a. boiler feedwater pump in a thermal power plant, customers can trust their Rexnord Euroflex Disc. Couplings have been optimized to ensure reliable operation for the lifetime of the drive train.

Get A Quote

high-speed steam generator - German translation Linguee

steam generator with the microprocessor automatic, with the unique construction, with the high performance, with the thermal deaeration of the demi-water for minimisation of the non-condensed gases and with the automatic desalinisation secures short times of

Get A Quote

High Speed Generator - Technical details, application

May 25, 2014 · Not only is the knowledge of high speed generators necessary but also a deep inside in inverter technology, partial discharge phenomenon and so called stray or additional loss. Latest successfully realized projects A short overview of the latest high speed generator

Get A Quote

High Speed Gearbox | Elecon

This Gear unit is used in high speed plants such as turbo generators, turbo Compressor, Boiler feed pump application etc. TAD Turbo Gear Unit (Single Helical Gear) The TAD turbo Gear unit is a single stage step-up or reduction gearbox with horizontally offset.

Get A Quote

High speed balancing | Sulzer

Do you need balancing services for turbine, compressor and generator rotors up to 200,000 lbs (62.5 tons) at low speed and up to 50,000 lbs (25 tons) at full operational speed? Contact Sulzer for high-speed or at-speed balancing by our experienced technicians and engineers.

Get A Quote

What are the differences between low-pressure turbines and

Jun 18, 2015 · There are 3 sections to a steam turbine viz. high pressure, intermediate pressure and low pressure turbine. All three are mounted on the same shaft which rotates at 3600 rpm in a generator to make electricity. Here's a simplified steam flow path through HP, IP and LP turbines. (highlighted red).

Get A Quote

Steam turbine flow & operation - Processing Magazine

An Elliott TH power recovery expander turbine converts high temperature, low pressure flue gas energy into usable power. The turbine often is used to drive compressors or generators in refinery fluid catalytic cracking (FCC) service. Recovery power for these applications can approach 50,000 hp (37,300 kW).

Get A Quote

Massive Selection for High Speed Steam Turbine Back

We focus on the promotion of the single-tier and fast-installation steam turbine, three platform and one station steam turbine, high-speed and high-efficiency steam turbine, as well as matched generators and electric control equipment. Characteristics of QNP Turbine: High speed, high

Get A Quote

High Speed Motors, Electric Generators, Permanent Magnet

Magnaforce Electric Motor Generators. Various requirements such as continuous need for increased high-power density, oil-free operations, high efficiency and zero emissions are leading to a growing demand for high-speed permanent magnet motors and generators.

Get A Quote

Generators | Power Conversion

Power Conversions Cylindrical High Speed Rotor is made from a solid cylindrical forging, and machines out the pole Learn more about Cylindrical High Speed Rotors Wind Generators

Get A Quote

New Benchmarks for Steam Turbine Efficiency - Power

The maximum single capacity of the "high-speed" TC steam turbines manufactured by Japanese producers has remained at about 840 MW. Figure 2. MHI steam turbine in

Get A Quote

A HIGH-SPEED PHOTOGRAPHIC -SYSTEM IN A STEAM

program to analyze and photograph the flow in a steam turbine. As part of this program a high-speed photographic system was designed for the purpose of visualizing the con-densate flow in a test turbine. This report describes the design of the photographic sys-tem and the verification of its performance using "dry" turbine mockups.

Get A Quote

High-speed steam engine - Wikipedia

High-speed steam engines were one of the final developments of the stationary steam engine. They ran at a high speed, of several hundred rpm, [1] which was needed by tasks such as electricity generation.

Get A Quote